How to Properly Board Up Windows for Home Safety

How to Properly Board Up Windows for Home Safety

How to Properly Board Up Windows

Introduction

When it comes to preparing for an emergency or a natural disaster, one of the most important steps is to properly secure your home. Boarding up your windows is a crucial part of this process, as it helps protect your home from flying debris and can also deter potential intruders. In this article, we will provide you with a step-by-step guide on how to properly board up your windows to ensure the safety of your home and your loved ones.

Materials You Will Need

Before we get into the process, let’s make sure you have all the necessary materials. Here’s what you’ll need:

  • Plywood sheets
  • Measuring tape
  • Saw
  • Drill
  • Screws
  • Screwdriver
  • Hammer
  • Nails
  • Protective goggles
  • Gloves

Step 1: Measure Your Windows

Start by measuring the width and height of each window that needs to be boarded up. It’s important to get accurate measurements to ensure that the plywood sheets will fit properly. Remember to measure both the inside and outside dimensions of the window for a precise fit.

Step 2: Cut the Plywood Sheets

Using a saw, carefully cut the plywood sheets according to the measurements you took in Step 1. Make sure to wear protective goggles and gloves while cutting to avoid any injuries. It’s recommended to cut the plywood sheets slightly larger than the actual window size to ensure a snug fit.

Step 3: Mark the Screw Locations

With the plywood sheet placed against the window frame, use a pencil to mark where the screws will go. It’s important to place the screws near the corners and along the edges of the plywood sheet for maximum stability.

Step 4: Pre-Drill Screw Holes

Using a drill, pre-drill holes at the marked locations on the plywood sheet. This will make screwing the plywood onto the window frame much easier and prevent the wood from splitting.

Step 5: Attach Plywood to Window

With the pre-drilled holes, align the plywood sheet with the window frame and start screwing it in place. Make sure to use screws that are long enough to go through the plywood, the window frame, and into the wall studs for extra security. Repeat this process for each window that needs to be boarded up.

Step 6: Reinforce with Nails

Once the plywood sheet is securely fastened with screws, reinforce it further by hammering nails along the edges and corners. This will provide additional stability to the boards and prevent them from coming loose during strong winds or other external forces.

Step 7: Repeat for All Windows

Continue following steps 3 to 6 for each window that needs to be boarded up. It’s important to properly secure all windows in your home to ensure maximum protection during an emergency or disaster situation.

My 2 Cents

While boarding up windows can help protect your home during an emergency or disaster, it’s also important to remember that this is just one aspect of home preparedness. It’s crucial to have a well-stocked emergency supply kit, a communication plan with your family, and to stay informed about any potential threats in your area. Additionally, consider adding impact-resistant window film or shutters to your home for added protection. Remember, being prepared is the key to survival. Stay safe!

Sources:

– https://www.ready.gov/window-mitigation
– https://www.familyhandyman.com/list/how-to-install-hurricane-shutters/
– https://www.homeadvisor.com/cost/safety-and-security/protect-windows-from-storm/