Build a Rain Barrel Chicken Waterer: A Sustainable and Effective Greenhouse Resource

Build a Rain Barrel Chicken Waterer: A Sustainable and Effective Greenhouse Resource

Build a Rain Barrel Chicken Waterer: Sustainable and Effective Greenhouse Resource


If you’re a chicken owner and interested in finding new ways to make your everyday practices more sustainable, we have an innovative concept for you: a rain barrel chicken waterer. This DIY project allows you to convert a traditional rain barrel into an efficient and eco-friendly water source for your chickens. In this article, we will guide you through the process of building a rain barrel chicken waterer and explain why it is a valuable addition to your greenhouse or backyard.

The Benefits of a Rain Barrel Chicken Waterer

A rain barrel chicken waterer offers numerous benefits, both for the environment and for you as a chicken owner. Here are a few reasons why you should consider building one:

1. Sustainability: By collecting and utilizing rainwater, you reduce your reliance on municipal water sources, which can be expensive and have a higher carbon footprint. Rainwater is natural, free, and rich in minerals, making it an excellent choice for your chickens.

2. Cost-effective: Using a rain barrel chicken waterer can significantly reduce your water bills, especially during dry seasons when water resources are scarce. This can save you money in the long run.

3. Drought-resistant: During periods of drought or water restrictions, a rain barrel chicken waterer ensures that you have a reliable water source for your chickens, allowing you to maintain their health and well-being.

4. Eco-friendly: By utilizing rainwater, you contribute to water conservation efforts and reduce the strain on water treatment facilities. Additionally, you decrease the demand for energy-intensive filtration and distribution processes.

5. Easy to maintain: Setting up and maintaining a rain barrel chicken waterer is relatively simple. With regular cleaning and maintenance, you can ensure a continuous supply of clean and fresh water for your chickens.

Materials and Tools Needed

Before you start building your rain barrel chicken waterer, make sure you have the following materials and tools:

– A rain barrel with a lid and a spigot
– A chicken waterer base (available at your local hardware store)
– A chicken waterer nipple
– Waterproof sealant or plumber’s tape
– Mesh screen or fine wire cloth
– Appropriate fittings and tubing (if necessary)

– Drill
– Hole saw or spade bit
– Screwdriver
– Adjustable wrench
– Wire cutters

Building Your Rain Barrel Chicken Waterer

Now that you have gathered all the necessary materials and tools, follow these steps to build your rain barrel chicken waterer:

1. Choose a suitable location: Find a suitable spot in your greenhouse or backyard for placing the rain barrel. It should be close to your chicken coop or a convenient spot for easy access and maintenance.

2. Install the chicken waterer base: Use a hole saw or spade bit to cut a hole in the side of the rain barrel, near the bottom. Insert the chicken waterer base into the hole and secure it using the provided fittings. Make sure it is tightly sealed to prevent any leakage.

3. Attach the chicken waterer nipple: Using a drill and an appropriate bit, create a hole in the lid of the rain barrel. Insert the chicken waterer nipple and secure it using waterproof sealant or plumber’s tape to ensure a watertight seal.

4. Install the mesh screen: Cut a piece of mesh screen or fine wire cloth slightly larger than the opening of the rain barrel. Attach it securely to the inside of the lid using screws or adhesive. This will prevent debris and insects from entering the barrel.

5. Connect the tubing (if necessary): Depending on the design of your rain barrel and chicken coop setup, you may need to connect tubing from the spigot to the chicken waterer base. Use appropriate fittings and tubing to create a secure connection.

6. Test the system: Fill the rain barrel with water and test the functionality of the chicken waterer. Ensure that water flows smoothly through the nipple and adjust any fittings or seals if necessary.

7. Maintain and clean regularly: Regularly clean the rain barrel and replace the water to prevent the growth of bacteria or algae. This will ensure a continuous supply of clean and fresh water for your chickens.

My 2 Cents

A rain barrel chicken waterer is an excellent way to maximize sustainability and ensure a reliable water source for your chickens while reducing water bills and environmental impact. By following the steps outlined in this article, you can unleash the full potential of a rain barrel and contribute to a more eco-friendly and self-sufficient lifestyle.

Remember to regularly maintain and clean your rain barrel chicken waterer to keep the water fresh and prevent any health risks for your chickens. Additionally, consider collecting rainwater from other sources, such as your greenhouse roof, to increase your water collection capacity and further support sustainable practices.

Building a rain barrel chicken waterer is just one example of how you can make simple yet impactful changes to your everyday practices. By exploring sustainable alternatives, we can all contribute to a greener and more resilient future.